Worn pin bores,
rebuilt true.
Lovin Line Boring repairs sloppy, egg-shaped pin bores on heavy equipment. We weld the bore back up, line bore it to size, and fit new pins and bushings, so your machine tightens up and gets back to work.
Weld. Bore. Pin it.
A boring bar runs straight through both lugs on one centerline, so the new bores line up with each other, not just with the worn metal around them.
Build up the bore
Worn, oval bores get welded back up so there is fresh metal to cut into.
Line bore to size
A portable boring bar is set on the true centerline and machines each bore round and in line.
Fit pins & bushings
New bushings press in and new pins slide home. The slop is gone.
What we do
Line boring
Re-machine worn pin bores and bearing seats on one straight centerline.
Align boring
Bring bores that have walked out of line back into alignment with each other.
Welding
Bore build-up, crack repair and structural welding on booms, sticks and frames.
Fabrication
Custom brackets, ears and repair plates cut and welded to fit the job.
Pins & bushings
Replacement pins and bushings sized to the new bores and installed.
On-site service
We can bring the boring bar to the machine anywhere in Florida.
All of Florida
Based in Plant City, with the boring bar ready to travel statewide. From the Panhandle to the Keys, if your machine is in Florida, we can get to it.
- Tampa BayHome base
- Central FloridaOrlando · Lakeland
- North FloridaJacksonville · Gainesville
- PanhandleTallahassee · Pensacola
- South FloridaFort Myers · Miami